How to use Wall Stickers

• Position the Sticker: Place the sticker in your desired position on the wall. Hold it in place with vertical strips of masking tape at the top, and add a center hinge using masking tape as well.

• Peel the Top Layer: Remove the two top masking tape strips. Gently peel off the top layer (application tape) toward yourself, carefully removing the sticker from the backing paper. Ensure the sticker lifts cleanly from the backing.

• Trim the Backing Paper: Cut away the backing paper, leaving only the application tape and sticker. Be careful not to let the sticker touch the wall at this stage.

• Apply the Sticker: Using a squeegee, apply the sticker to the wall at a 45-degree angle. As you move the squeegee, press out any air bubbles.

• Remove Center Tape and Apply Bottom Half: Once the top half is applied, remove the center masking tape. Repeat the same process for the bottom half of the sticker, applying it carefully and smoothing out any bubbles.

• Firmly Press the Sticker: Rub over the entire sticker with the squeegee to ensure it adheres well to the wall.

• Peel the Application Tape: Slowly peel off the top layer (application tape) at a 180-degree angle, pulling it back onto itself. Make sure the sticker stays on the wall—if it starts to peel away, re-squeegee the sticker to ensure it stays in place.

• Final Touch: Step back and admire your new wall sticker!